DTC DETECTING CONDITION: Immediately at fault recognition CAUTION: After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mode > PROCEDURE. WIRING DIAGRAM: • Engine Electrical System ENGINE TYPE FB (WITHOUT PUSH BUTTON START) Engine Electrical System > WIRING DIAGRAM • Engine Electrical System ENGINE TYPE FB (WITH PUSH BUTTON START) Engine Electrical System > WIRING DIAGRAM
1. OUTLINE OF DIAGNOSIS Detect open circuits of the sensor. Judge as NG when the impedance of the element is large. 2. COMPONENT DESCRIPTION
3. EXECUTION CONDITION
4. GENERAL DRIVING CYCLE Perform the diagnosis continuously after the enable conditions have been established. 5. DIAGNOSTIC METHOD If the duration of time while the following conditions are met is longer than the time indicated, judge as NG.
Time Needed for Diagnosis: 5000 ms Malfunction Indicator Light Illumination: Illuminates as soon as a malfunction occurs. |
Installation
1. Clean the mating surface of oil pan and transmission case.2. Make sure that the CVTF filter is installed to the transmission case.NOTE:Make sure that the CVTF filter does not protrude from the transmission case.3. Check the control valve body for dust and other foreign matter.4. Install the O-rin ...