DTC DETECTING CONDITION: Immediately at fault recognition TROUBLE SYMPTOM: • Poor driving performance • Knocking occurs CAUTION: After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mode > PROCEDURE. WIRING DIAGRAM: • Engine Electrical System ENGINE TYPE FB (WITHOUT PUSH BUTTON START) Engine Electrical System > WIRING DIAGRAM • Engine Electrical System ENGINE TYPE FB (WITH PUSH BUTTON START) Engine Electrical System > WIRING DIAGRAM
1. OUTLINE OF DIAGNOSIS Detect the open or short circuit of knock sensor. Judge as NG if out of specification. 2. COMPONENT DESCRIPTION
3. EXECUTION CONDITION
4. GENERAL DRIVING CYCLE Always perform the diagnosis continuously. 5. DIAGNOSTIC METHOD If the duration of time while the following conditions are met is longer than the time indicated, judge as NG.
Time Needed for Diagnosis: 1000 ms Malfunction Indicator Light Illumination: Illuminates as soon as a malfunction occurs. |
Installation
1. Install the air intake boot, and connect the PCV hose.2. Tighten the clamp (C) securing the throttle body to the air intake boot.Tightening torque:3 N·m (0.3 kgf-m, 2.2 ft-lb)3. Tighten the clamp (B) securing the air cleaner case (rear) to the air intake boot.Tightening torque:3 N·m ...