DTC DETECTING CONDITION: Detected when two consecutive driving cycles with fault occur. CAUTION: After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mode > PROCEDURE.
1. OUTLINE OF DIAGNOSIS Detect malfunctions of the fuel level sensor output property. If the fuel level does not vary in a particular driving condition / engine condition where it should, judge as NG. 2. COMPONENT DESCRIPTION
3. EXECUTION CONDITION
4. GENERAL DRIVING CYCLE Always perform the diagnosis continuously. 5. DIAGNOSTIC METHOD Judge as NG when the following conditions are established.
Time Needed for Diagnosis: Less than 1 second Malfunction Indicator Light Illumination: Illuminates when malfunction occurs in 2 continuous driving cycles. |
Component
1. INTAKE MANIFOLD ASSEMBLY 1(1)Intake manifold protector(5)Manifold absolute pressure sensorTightening torque: N·m (kgf-m, ft-lb)(2)Cushion(6)O-ringT1:3.4 (0.3, 2.5)(3)Gasket(7)Purge control solenoid valveT2:6.4 (0.7, 4.7)(4)Intake manifold ASSY T3:25 (2.5, 18.4)2. INTAKE MANIFOLD ASSEMBLY ...