NOTE: For the diagnostic procedure, refer to DTC P0606. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC P0606 CONTROL MODULE PROCESSOR 1. OUTLINE OF DIAGNOSIS Judge as NG when the EEPROM operation is abnormal. 2. COMPONENT DESCRIPTION
3. EXECUTION CONDITION
4. GENERAL DRIVING CYCLE Perform the diagnosis during self shut. 5. DIAGNOSTIC METHOD Judge as NG when the following conditions are established.
Time Needed for Diagnosis: 2 times Malfunction Indicator Light Illumination: Illuminates as soon as a malfunction occurs. |
Disassembly
1. Remove the reservoir tank.CAUTION:Be careful not to tighten a vise excessively.(1) Place the master cylinder assembly between aluminum plates and fix it on a vise.(2) Drive out the pin using a punch and a hammer to remove the reservoir tank.2. Remove the seal from the cylinder body assembly. ...