Honda Civic manuals

Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc p0801 reverse inhibit control circuit/open

DTC DETECTING CONDITION:

Immediately at fault recognition

NOTE:

For diagnostic procedures, refer to “BODY CONTROL SYSTEM (DIAGNOSTICS)”. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC B1016 SHIFT LOCK CIRCUIT

1. OUTLINE OF DIAGNOSIS

Detect the malfunction of shift lock solenoid or circuit.

Judge as NG if abnormal signal from the integrated unit is received, when bus off is not detected and there is no trouble in CAN between the integrated unit.

2. EXECUTION CONDITION

Secondary Parameters

Execution condition

Malfunctions listed on the right column are not detected:

U0073

U0140, U0422

3. DIAGNOSTIC METHOD

If the duration of time while the following conditions are met is longer than the time indicated, judge as NG.

Judgment Value

Malfunction Criteria

Threshold Value

Shift lock solenoid system circuit abnormal (received from BIU)

ON

Time Needed for Diagnosis: 1 second

Dtc p0842 transmission fluid pressure sensor/switch "a" circuit low
DTC DETECTING CONDITION:Immediately at fault recognitionTROUBLE SYMPTOM:Shift characteristics malfunction1. ENGINE TYPE FBWIRING DIAGRAM:CVT control system CVT Control System > WIRING DIAGRAMSTEPCHEC ...

Dtc p0776 pressure control solenoid "b" performance/stuck off
DTC DETECTING CONDITION:Detected when two consecutive driving cycles with fault occur.TROUBLE SYMPTOM:• Engine speed increases abruptly, and can not accelerate.• Excessive slippage is felt ...

Other materials:

Engine hood
CAUTION  When you open the engine hood, do not stand the wiper blades up. Furthermore, while the hood is open, do not operate the windshield wipers. Doing so could result in damage to the engine hood and wiper blades.  Be extremely careful not to catc ...

© 2017-2024 Copyright www.sulegacy.com