DTC DETECTING CONDITION: Immediately at fault recognition CAUTION: After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mode > PROCEDURE.
1. OUTLINE OF DIAGNOSIS Judge as NG when faulty signal of each part is sent from the battery sensor. 2. COMPONENT DESCRIPTION The battery sensor monitors the data of battery voltage, current, temperature, etc. ECM receives these data via LIN communication with the battery sensor. 3. EXECUTION CONDITION
4. GENERAL DRIVING CYCLE Perform the diagnosis continuously after the enable conditions have been established. 5. DIAGNOSTIC METHOD Judge as NG when the following conditions are established.
Time Needed for Diagnosis: Less than 1 second Malfunction Indicator Light Illumination: Does not illuminate. |
Component
1. FRONT SEAT BELT(1)Adjuster ASSY - seat belt(4)Wave washerTightening torque: N·m (kgf-m, ft-lb)(2)Trim panel - center pillar UPR(5)Seat belt inner - frontT1:7.5 (0.8, 5.5)(3)Seat belt outer - front(6)Seat belt outer - front (only on passenger’s side with belt tension sensor)T2:30 (3.1 ...