Honda Civic manuals

Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc p2005 tgv control stuck open bank 2

DTC DETECTING CONDITION:

Immediately at fault recognition

CAUTION:

After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mode > PROCEDURE.

STEPCHECKYESNO

1.CHECK FOR ANY OTHER DTC ON DISPLAY.

Is any other DTC displayed-

Check the appropriate DTC using the “List of Diagnostic Trouble Code (DTC)”. List of Diagnostic Trouble Code (DTC)

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC P2005 TGV CONTROL STUCK OPEN BANK 2

2.CHECK TUMBLE GENERATOR VALVE LH.

1) Remove the tumble generator valve assembly LH.

2) Check the tumble generator valve.

Is there any dirt or clogging with foreign objects in the tumble generator valve-

Clean the tumble generator valve.

Replace the tumble generator valve LH. Tumble Generator Valve

1. OUTLINE OF DIAGNOSIS

Detect the malfunction of tumble generator valve motor function.

Judge open fixing malfunction when the opening degree is large even after finishing the tumble generator valve closing driving.

2. EXECUTION CONDITION

Secondary Parameters

Execution condition

Battery voltage

≥ 10.9 V

Tumble generator valve “close” signal output time

≥ 1600 ms

3. GENERAL DRIVING CYCLE

Always perform the diagnosis continuously.

4. DIAGNOSTIC METHOD

If the duration of time while the following conditions are met is longer than the time indicated, judge as NG.

Judgment Value

Malfunction Criteria

Threshold Value

Tumble generator valve opening angle

≥ 71.4 deg

Time Needed for Diagnosis: 3000 ms

Malfunction Indicator Light Illumination: Illuminates as soon as a malfunction occurs.

Dtc p2006 tgv control stuck closed bank 1
DTC DETECTING CONDITION:Immediately at fault recognitionCAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mod ...

Dtc p2004 tgv control stuck open bank 1
DTC DETECTING CONDITION:Immediately at fault recognitionCAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mod ...

Other materials:

Capacity
Model2.5 L DOHC non-turbo3.6 L DOHC non-turbo6MTCVTFuel tankL (US gal, Imp gal)70 (18.5, 15.4)Engine oilTotal capacity (at overhaul)L (US qt, Imp qt)5.7 (6.0, 5.0)7.8 (8.2, 6.9)Filling amount of engine oilL (US qt, Imp qt)When replacing engine oil and oil filter4.8 (5.1, 4.2)6.5 (6.9, 5.7)When repla ...

© 2017-2024 Copyright www.sulegacy.com