NOTE: For the diagnostic procedure, refer to LAN section. Basic Diagnostic Procedure 1. OUTLINE OF DIAGNOSIS Detect malfunction of CAN communication. Judge as NG when CAN communication failure between TCM, VDC CM and combination meter has occurred. 2. COMPONENT DESCRIPTION (Common Specifications) CAN Protocol 2.0 B (Active) Frame Format: 11 Bit ID Frame (Standard Frame) Conforms to ISO11898 Communication Speed: 500 kbps 3. EXECUTION CONDITION
4. GENERAL DRIVING CYCLE Always perform the diagnosis continuously. 5. DIAGNOSTIC METHOD Judge as NG when the following conditions are established.
Time Needed for Diagnosis: 500 ms Malfunction Indicator Light Illumination: Illuminates as soon as a malfunction occurs. |
Removal
1. Remove the transmission assembly from the vehicle. Automatic Transmission Assembly > REMOVAL2. Remove the torque converter assembly. Torque Converter Assembly > REMOVAL3. Remove the oil pump chain cover.4. Remove the seal ring from center support COMPL.5. Remove the driven sprocket from oil pum ...