Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc u0122 lost communication with vehicle dynamics control module

Subaru Legacy BN/BS (2015-2019) Service Manual / Eyesight (diagnostics) / Diagnostic procedure with diagnostic trouble code (dtc) / Dtc u0122 lost communication with vehicle dynamics control module

Detected when CAN data from VDC is not transmitted to stereo camera.

NOTE:

Perform the diagnosis for LAN system. Basic Diagnostic Procedure > PROCEDURE

Dtc u0126 lost communication with steering angle sensor module

Detected when CAN data from steering angle sensor is not transmitted to stereo camera.NOTE:Perform the diagnosis for LAN system. Basic Diagnostic Procedure > PROCEDURE ...

Dtc b2802 etc abnormal

Detected when error occurs in the electronic throttle control.NOTE:Check the electronic throttle control. Basic Diagnostic Procedure > PROCEDURE Basic Diagnostic Procedure > PROCEDURE ...

Other materials:

Installation
1. Install the cushion rubber and the rear exhaust cover to the vehicle body.Tightening torque:10 N·m (1.0 kgf-m, 7.4 ft-lb)2. Install the muffler to the cushion rubber.3. Install the bolts and self-locking nuts securing the rear exhaust pipe to the muffler.NOTE:• Use a new gasket and s ...