NOTE: Refer to “LAN SYSTEM (DIAGNOSTICS)” for diagnostic procedure. Basic Diagnostic Procedure 1. OUTLINE OF DIAGNOSIS • Detect malfunction of CAN communication. • Judge as NG when CAN communication failure occurs with the combination meter. 2. EXECUTION CONDITION
3. DIAGNOSTIC METHOD If the duration of time while the following conditions are met is longer than the time indicated, judge as NG.
Time Needed for Diagnosis: 2 seconds |
Removal
CAUTION:• Avoid unnecessary removal of parts in order to prevent fluid leakage.• When the VDCCM&H/U components are removed, be sure to perform the installation according to the installation procedures. VDC Control Module and Hydraulic Control Unit (VDCCM&H/U) > INSTALLATION1. Disconnect ...