Detected when CAN data is not received from auto headlight beam leveler CM. NOTE: Perform the diagnosis for LAN system. Basic Diagnostic Procedure > PROCEDURE |
Installation
1. Install the cam sprocket.2. Use the ST to lock the cam sprocket, and install the cam sprocket bolt.Tightening torque:Tighten to a torque of 29.5 N·m (3.0 kgf-m, 21.8 ft-lb), and then tighten further by 45°.ST 499977500CAM SPROCKET WRENCH• IN side• EX side3. Install th ...