Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc u0426 invalid data received from immobilizer control module

Subaru Legacy BN/BS (2015-2019) Service Manual / Body control system (diagnostics) / Diagnostic procedure with diagnostic trouble code (dtc) / Dtc u0426 invalid data received from immobilizer control module

Received error data from immobilizer CM.

NOTE:

Perform the diagnosis for LAN system. Basic Diagnostic Procedure > PROCEDURE

Dtc u1673 lin communication bus error body control module

DTC DETECTING CONDITION:Integrated unit communication is shut down because of LIN error.TROUBLE SYMPTOM:LIN communication is not normal.WIRING DIAGRAM:NOTE:For the coupling connector, refer to “ ...

Dtc u0169 lost communication with sunroof control module

DTC DETECTING CONDITION:No data is received from sunroof unit.TROUBLE SYMPTOM:The sunroof does not operate normally.WIRING DIAGRAM:NOTE:For the coupling connector, refer to “WIRING SYSTEM” ...

Other materials:

Installation
1. Connect the drain tube, and install the drain tube to the tube clamp (A) and tube clamp (B).CAUTION:• Make sure there are no damage or dust on connections. If necessary, clean the seal surface of the pipe.• Make sure that the quick connector is securely connected.NOTE:Connect the quic ...