Subaru Legacy BN/BS (2015-2019) Service Manual: Egr control valve

Installation

1. Connect the drain tube, and install the drain tube to the tube clamp (A) and tube clamp (B).CAUTION:• Make sure there are no damage or dust on connections. If necessary, clean the seal surfac ...

Removal

1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the clip (A), and loosen the clamps (B) and (C) securing the air intake boot.3. Remove the air intake boot from the air cleaner ca ...

Other materials:

Installation
CAUTION:• Do not reuse the removed door sash tape. Replace it with a new tape.• When applying tape, use a spatula, etc. to apply evenly, pushing it against the sash to make sure that no air bubbles are formed.If air bubbles are formed, reapply the tape.• If the tape is wrinkled, et ...