Honda Civic manuals

Subaru Legacy BN/BS (2015-2019) Service Manual: Egr pipe

Installation
1. Install the EGR control valve, and connect the connector to the EGR control valve.NOTE:Use a new gasket.Tightening torque:19 N·m (1.9 kgf-m, 14.0 ft-lb)2. Install the EGR pipe A. EGR Pipe > ...

Removal
1. EGR PIPE A1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the collector cover.(1) Carefully pull up the rear of collector cover at two positions (A).(2) Carefully pull up the ...

Other materials:

Installation
1. WATER PUMP PULLEY1. Using the ST, install the water pump pulley.ST1 18355AA000PULLEY WRENCHST2 18334AA030PULLEY WRENCH PIN SETTightening torque:14 N·m (1.4 kgf-m, 10.3 ft-lb)2. Install the V-belts. V-belt > INSTALLATION2. WATER PUMP1. Install the water pump to oil pan upper.NOTE:Use ...

© 2017-2024 Copyright www.sulegacy.com