Subaru Legacy BN/BS (2015-2019) Service Manual: Electrical component location location

Subaru Legacy BN/BS (2015-2019) Service Manual / Continuously variable transmission (diagnostics) / Electrical component location location

1. CONTROL MODULE

(1)	TCM (engine type FB)	(3)	AT OIL TEMP light	(4)	AWD light
(2)	TCM (engine type EZ)

2. SENSOR

• ENGINE TYPE FB

(1)	Secondary speed sensor	(3)	Primary speed sensor	(5)	Inhibitor switch
(2)	Turbine speed sensor	(4)	Secondary pressure sensor

• ENGINE TYPE EZ

(1)	Secondary speed sensor	(3)	Primary speed sensor	(5)	Inhibitor switch
(2)	Front wheel speed sensor	(4)	Secondary pressure sensor

3. SOLENOID

• ENGINE TYPE FB

(1)	Secondary solenoid	(3)	Lock-up duty solenoid	(5)	Primary UP solenoid
(2)	AWD solenoid	(4)	Primary DOWN solenoid	(6)	F&R solenoid

• ENGINE TYPE EZ

(1)	Secondary solenoid	(4)	Primary DOWN solenoid	(6)	F&R solenoid
(2)	AWD solenoid	(5)	Primary UP solenoid	(7)	Lock-up ON/OFF solenoid
(3)	Lock-up duty solenoid

Drive cycle procedure

It is possible to complete diagnosis of the DTC by performing the indicated drive cycle. After the repair for the DTC, perform a necessary drive cycle and make sure the function recovers and the DTC i ...

Inspection mode procedure

Road Test Road Test ...

Other materials:

Repair
1. COATING METHOD FOR PP BUMPERProcess No.Process nameJob contents1Bumper installationPlace the bumper on a paint worktable as required. Use the paint worktable conforming to inner shape of bumper if possible.Cross section of bumper(1) Bumper(2) Paint worktable2MaskingMask specified part (black base ...