Subaru Legacy BN/BS (2015-2019) Owners Manual: Enabling functions

Subaru Legacy BN/BS (2015-2019) Owners Manual / Keys and doors / Keyless access with push-button start system (if equipped) / Selecting audible signal operation / Enabling functions

When the procedure to disable the functions is performed again, a chirp sound will be heard, and the functions are enabled.

NOTE

The keyless access function will be enabled only if you perform the procedure in the same manner you disabled the function (for example, when disabling by operating the driver's door, the function will not be enabled even if you operate the access key).
Press the push-button ignition switch if you do not know the procedure in which the keyless access function was disabled.

When disabling by operating the driver's door: a chirp will not be heard
When disabling by operating the access key: a chirp will be heard

When access key does not operate properly

Refer to "Access key - if access key does not operate properly" .

Replacing battery of access key

Refer to "Replacing battery of access key" F11-50.

Replacing access key

Access keys can be replaced at SUBARU dealers. For more details, contact a SUBARU dealer.

Disabling functions

By operating the access key If you have registered a PIN code for PIN Code Access, you can disable the keyless access function by operating the access key. For details about registering a PIN cod ...

Certification for keyless access with push-button start system

U.S.-spec. models FCC ID: HYQ14AHC FCC ID: Y8PFJ14-2 FCC ID: Y8PSSPIMB02 CAUTION FCC WARNING Changes or modifications not expressly approved by the party responsible for complia ...

Other materials:

Installation
1. Apply liquid gasket to the oil pressure switch threads.Liquid gasket:THREE BOND 1324 (Part No. 004403042) or equivalent2. Install the oil pressure switch to the oil pan upper.Tightening torque:25 N·m (2.5 kgf-m, 18.4 ft-lb)3. Connect the terminal to the oil pressure switch.4. Install the u ...