Subaru Legacy BN/BS (2015-2019) Service Manual: Engine wiring harness

Installation

1. Install the engine oil temperature sensor to the chain cover, and connect the connector to the engine oil temperature sensor.NOTE:Use a new gasket.Tightening torque:18 N·m (1.8 kgf-m, 13.3 f ...

Removal

1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the intake manifold assembly. Intake Manifold Assembly > REMOVAL3. Disconnect each connector to remove the engine wiring harness. ...

Other materials:

Removal
1. Remove the collector cover.(1) Carefully pull up the rear of collector cover at two positions (A).(2) Carefully pull up the front of collector cover at two positions (B) while moving it forward.2. Disconnect the ground terminal from battery sensor. NOTE3. Remove the V-belts. V-belt > REMOVAL4. ...