Subaru Legacy BN/BS (2015-2019) Service Manual: Flywheel

Inspection

1. CLUTCH START SWITCH1. Perform the following inspections. If the clutch start switch does not operate normally, adjust the switch, and check it again. Clutch Switch > ADJUSTMENT• Make sure th ...

Removal

1. Remove the transmission assembly. Manual Transmission Assembly > REMOVAL2. Remove the clutch cover and clutch disc. Clutch Disc and Cover > REMOVAL3. Attach the ST.ST 498497100CRANKSHAFT STOPP ...

Other materials:

Installation
1. Install the thrust bearing to the converter case.NOTE:Face the temper color surface to the converter case side.2. Install the seal ring to the input shaft.NOTE:• Use new seal rings.• When installing the seal rings, do not expand the seal rings too much.• Apply CVTF to the seal r ...