CAUTION: After a forced operation, make sure to perform an initialize operation. Sunroof Control System > OPERATION If the lid assembly - sunroof does not operate or the motor assembly is not supplied with power, remove the motor assembly to move the lid assembly - sunroof manually. 1. Remove the overhead console. (Models without EyeSight) Spot Map Light > REMOVAL 2. Remove the stereo camera cover assembly. (Models with EyeSight) Stereo Camera > REMOVAL 3. Remove the connector and bolt to remove the motor assembly. 4. Move the lid assembly - sunroof by hand. 5. Install the connector and bolt. 6. Install the overhead console. (Models without EyeSight) Spot Map Light > INSTALLATION 7. Install the stereo camera cover assembly. (Models with EyeSight) Stereo Camera > INSTALLATION |
Dtc b1872 short in front seat cushion airbag rh (to ground)
DIAGNOSIS START CONDITION:Ignition voltage is 10 V to 16 V.DTC DETECTING CONDITION:GND short circuit failure (shorted to ground in main harness, shorted to ground in front seat side airbag RH, shorted to ground in airbag CM internal circuit)CAUTION:Before performing diagnosis, refer to “CAUTIO ...