Subaru Legacy BN/BS (2015-2019) Service Manual: Front reduction driven gear

Assembly

1. Using the ST, install the ball bearing to front reduction drive gear.NOTE:Use a new ball bearing.ST 18651AA000INSTALLER2. Using ST1 and ST2, install the ball bearing to front reduction drive gea ...

Removal

NOTE:For removal of front reduction driven gear, refer to the “Front Reduction Drive Gear”. Front Reduction Drive Gear > REMOVAL ...

Other materials:

Disassembly
1. Disconnect the clutch pipe from the master cylinder.2. Remove the clutch damper mounting nut from the pedal assembly, and disconnect the clutch pipe from the clamp.3. Remove the clutch switches.4. Remove the clip and pull out the clevis pin.(A)Clevis pin(B)Clip5. Disconnect the connector from the ...