Subaru Legacy BN/BS (2015-2019) Owners Manual: Front seatbelts
- Adjust the seat position:
Driver's seat: Adjust the seatback to the
upright position. Move the seat as far from
the steering wheel as practical while still
maintaining full vehicle control.
Front passenger's seat: Adjust the seatback
to the upright position. Move the seat
as far back as possible.
- Sit well back in the seat.
- Pick up the tongue plate and pull the
belt out slowly. Do not let it get twisted.
- If the belt stops before reaching the
buckle, return the belt slightly and pull
it out more slowly.
- If the belt still cannot be unlocked,
let the belt retract slightly after giving it
a strong pull, then pull it out slowly
again.
- Insert the tongue plate into the buckle
until you hear a click.
- To make the lap part tight, pull up on
the shoulder belt.
- Place the lap belt as low as possible
on your hips, not on your waist.
|
WARNING
Never use a belt that is twisted or
reversed. In an accident, this can
increase the risk or severity of
injury.
Keep the lap belt as low as possible on y ...
The shoulder belt anchor height should be
adjusted to the position best suited for the
driver/front passenger. Always adjust the
anchor height so that the shoulder belt
passes over the middle ...
Other materials:
Precautions when working with the parts mounted on the vehicle
1. Always refer to “CAUTION” and “NOTE” of “General Description” in the same model’s service manual before starting the service.2. When working under a vehicle which is jacked-up, always be sure to use rigid rack.3. The parking brake must always be applied d ...