Honda Civic manuals

Subaru Legacy BN/BS (2015-2019) Owners Manual: Head restraint adjustment

WARNING
  •  Never drive the vehicle with the head restraints removed because they are designed to reduce the risk of serious neck injury in the event that the vehicle is struck from the rear. Also, never install the head restraints the opposite way around. Doing so will prevent the head restraints from functioning as intended. Therefore, when you remove the head restraints, you must reinstall all head restraints correctly to protect vehicle occupants.
  •  All occupants, including the driver, should not operate a vehicle or sit in a vehicle's seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in the event of a crash.

Both the driver's seat and front passenger's seat are equipped with head restraints.

Both head restraints are adjustable in the following ways.

Head restraint height adjustment

Head restraint height adjustment

  1. Head restraint
  2.  Release button

To raise: Pull the head restraint up.

To lower: Push the head restraint down while pressing the release button on the top of the seatback.

To remove: While pressing the release button, pull out the head restraint.

To install: Install the head restraint into the holes that are located on the top of the seatback until the head restraint locks. Press and hold the release button to lower the head restraint.

Head restraint height adjustment

Each head restraint should be adjusted so that the center of the head restraint is closest to the top of the occupant's ears.

Head restraint angle adjustment

Head restraint angle adjustment

The angle of the head restraint can be adjusted in several steps. While maintaining a suitable driving posture, adjust the head restraint to a position where the back of your head is as close to the head restraint as possible.

To tilt: Tilt the head restraint by hand to the preferred position. A click will be audible when the head restraint is locked.

To return: Tilt the head restraint once as far forward as it can go. The head restraint will automatically return to the fully upright position. Then, adjust the head restraint again to the preferred angle.

Memory function (driver's seat - if equipped)
WARNING  To avoid loss of vehicle control or personal injury, never perform the following operations while driving.  Adjusting the seat  Retrievin ...

Seat heater (if equipped)
The seat heater operates when the ignition switch is in the "ON" position. CAUTION  People with delicate skin may suffer slight burns even at low temperatures if they use the ...

Other materials:

Electrical
Model2.5 L DOHC non-turbo3.6 L DOHC non-turboIgnition timing (at idling)BTDCCVT: 5°±10°MT: 6°±10°15°±8°Spark plugType and manufacturerNGK: SILZKAR7B11NGK: SILFR6C11Generator12 V — 130 ABatteryType and capacity (5HR)12 V — 48AH (55D23R)12 V — 52AH (7 ...

© 2017-2024 Copyright www.sulegacy.com