Subaru Legacy BN/BS (2015-2019) Owners Manual: If not towing a trailer
- Remove the ball mount from the hitch
receiver tube and insert the receiver cover
onto the hitch receiver tube.
- Place the dust cap over the four-pin
connector of the hitch wire harness to
protect against possible damage.
- Occasionally lubricate terminals of the
four-pin connector using terminal grease.
|
Remove the receiver cover from the
hitch receiver tube. Then insert the ball
mount into the hitch receiver tube.
Insert the hitch pin into the hole
located on the hitch receiver tub ...
Your vehicle is neither designed nor
intended to be used for trailer towing.
Therefore, never tow a trailer with your
vehicle.
SUBARU assumes no responsibility for
injuries or vehicle damage ...
Other materials:
Telltale screen
Telltale screen
When the corresponding situation occurs,
the following telltales will be displayed on
the telltale screen.
Mark
Name
Door open indicator
High beam assist indicator
(green)
Engine low oil level
warning indicat ...