Subaru Legacy BN/BS (2015-2019) Owners Manual: If you have accidentally triggered the alarm
system
To stop the alarm
Perform any of the following operations.
- Press any button on the access key/
remote transmitter.
- Turn the ignition switch to the "ON"
position (models without "keyless access
with push-button start system").
- Turn the push-button ignition switch to
the "ACC" position (models with "keyless
access with push-button start system").
NOTE
Only registered keys will stop the
alarm. If the key is not registered, the
alarm will not stop. |
To change the setting of your vehicle's
alarm system for activation or deactivation,
do the following.
Disarm the alarm system. Refer to
"Disarming the system" .
Sit in the drive ...
NOTE
The system can be armed even if the
engine hood, the windows and/or
moonroof are open. Always make sure
that they are fully closed before arming
the system.
When arming ...
Other materials:
Airbag module disposal (deployment processing on vehicle) procedure
WARNING:Make sure to follow the instructions below. Otherwise, personal injuries may occur.• Before discarding an airbag module, always perform an operation process to prevent any false activation.• Wear protective gloves, safety goggles and earplugs during this operation. Wash your hand ...