Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Brake / Rear disc brake assembly / Inspection

1. Check the piston sliding part of caliper body and the piston - disc brake for uneven wear, damage or rust.

2. Check the rubber parts for damage or deterioration.

3. If faulty is found in the inspection, replace the relevant part.

Installation

NOTE:Before installation, remove mud and foreign matter from the disc brake assembly.1. Check each part. Rear Disc Brake Assembly > INSPECTION2. Install the support - rear disc brake to the housing a ...

Disassembly

CAUTION:• The piston cannot be removed from the caliper body assembly.• Do not remove the parking brake actuator assembly except when there are system malfunctions (such as emergency relea ...

Other materials:

Installation
CAUTION:• Do not start the engine before charging refrigerant.• If the engine is started with no refrigerant charge, replace the compressor assembly.• Replace O-rings and pipe clamps with new parts and install securely.• Before handling the airbag system components, refer to ...