Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection
1. CLUTCH PEDAL Move the clutch pedal in the lateral direction with a force of approximately 10 N (1 kgf, 2 lbf) to check that the clutch pedal deflection is within the service limit. CAUTION: If it exceeds the service limit, replace the clutch pedal assembly with a new part. Deflection of the clutch pedal: Service limit 4.0 mm (0.157 in) or less
|
Installation
1. Install the pedal assembly.Tightening torque:T: 18 N·m (1.8 kgf-m, 13.3 ft-lb)2. Install the snap pin and clevis pin connecting the operating rod and brake pedal.CAUTION:Always use a new cle ...
Disassembly
1. Disconnect the clutch pipe from the master cylinder.2. Remove the clutch damper mounting nut from the pedal assembly, and disconnect the clutch pipe from the clamp.3. Remove the clutch switches.4. ...
Other materials:
Airbag warning light remains on
DETECTING CONDITION:• Airbag warning light is faulty.• Airbag control module to combination meter circuit is shorted or open.• Grounding circuit is faulty.• Airbag control module is faulty.• Connector connection is improper.• Connections of (AB6, AB17, AB18) to ai ...
© 2017-2024 Copyright www.sulegacy.com
