Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection
Replace any faulty CVTF cooler hoses, CVTF cooler pipes and clamps found in the inspection below. 1. Check that there are no CVTF or engine coolant leaks from the connections. 2. Check the clamp for deformation. 3. Lightly bend the CVTF cooler hose and check for cracks in the surface or other damages. 4. Pinch the CVTF cooler hose with your fingers and check for poor elasticity. Also check for poor elasticity in the parts where the clamp was installed by pressing with your fingernail. 5. Check for peeling, cracks, and deformation at the tip of the hose. 6. Check the CVTF cooler (with warmer feature) for any damage. |
Installation
1. Install the CVTF cooler (with warmer feature).Tightening torque:23 N·m (2.3 kgf-m, 17.0 ft-lb)2. Install the engine coolant inlet hose.NOTE:With the paint on the engine coolant inlet hose fa ...
Disassembly
1. Remove the CVTF cooler (with warmer feature).2. Remove the harness stay. ...
Other materials:
Removal
1. MODEL WITHOUT KEYLESS ACCESS WITH PUSH BUTTON START1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. NOTE2. Remove the cover assembly - column.(1) Remove the clips, and remove the cover - column (a).(2) Remove the screws.(3) Release ...
