Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection
Repair or replace any faulty hoses, pipes, clamps, and washers found in the inspection below. • Check for CVTF leaks in joints at the transmission, CVTF cooler (air cool), pipes, and hoses. • Check the clamp for deformation. • Lightly bend the hose and check for cracks in the surface or other damages. • Pinch the hose with your fingers and check for poor elasticity. Also check for poor elasticity in the parts where the clamp was installed by pressing with your fingernail. • Check for peeling, cracks, and deformation at the tip of the hose. |
Removal
CAUTION:• Immediately after the vehicle has been running or after idling for a long time, the CVTF will be hot. Be careful not to burn yourself.• If the CVTF is spilt over exhaust pipe, wi ...
Installation
CAUTION:When installing the CVTF cooler pipe assembly on vehicle side, be careful not to bend the A/C pipe.1. Temporarily install the CVTF cooler pipe COMPL, transmission hanger and transmission radio ...
Other materials:
Voice command system operation
Press the talk switch on the steering
wheel.
After the voice command top screen has
been displayed, speech guidance will
commence.
NOTE
When the voice command mode is
audio mode, voice guidance for the
voice command system can be skipped
by pressing the talk switch on the
steerin ...
