Honda Civic manuals

Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Make sure that all component parts are free of scratches, holes and other faults.

Check the tooth contact. Drive Pinion Shaft Assembly > ADJUSTMENT

Apply CVTF to bearing and rotate the bearing to check for noise or dragging etc.

Check the starting torque of drive pinion shaft.

CAUTION:

Before measuring, apply differential gear oil to roller of bearing and rotate the bearing several times.

ST1 498937110HOLDER
ST2 499787700WRENCH

Starting torque:

5.1 — 17.1 N (0.5 — 1.7 kgf, 1.1 — 3.8 lbf)

Installation
1. Clean the mating surface of drive pinion retainer and converter case.2. Adjust the backlash and tooth contact between drive pinion shaft assembly and the front differential side gear. Drive Pinion ...

Disassembly
1. Flatten the tab of the lock nut.2. Using ST1, ST2 and ST3, fix at the spline portion of drive pinion shaft to remove the lock nut.ST1 499787500ADAPTERST2 499787700WRENCHST3 498937110HOLDER ...

Other materials:

Dtc b1632 curtain airbag sensor rh lost communication
DIAGNOSIS START CONDITION:Ignition voltage is 10 V to 16 V.DTC DETECTING CONDITION:Curtain airbag sensor RH communication error (open/short circuit or connector connection failure between airbag CM and sensor, sensor internal communication circuit failure, CM internal communication circuit failure)C ...

© 2017-2024 Copyright www.sulegacy.com