Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Continuously variable transmission(tr690) / Air breather hose / Inspection

• Check the hose for peeling, crack or clogging.

• Check the oil cap is not cracked or clogged.

• Check O-ring of oil cap is not damaged.

Removal

1. Remove the collector cover.(1) Carefully pull up the rear of collector cover at two positions (A).(2) Carefully pull up the front of collector cover at two positions (B) while moving it forward.2. ...

Installation

1. Install the oil cap.NOTE:Use new O-rings.2. Install the two air breather hoses.3. Install the air intake boot. Air Intake Boot > INSTALLATION4. Connect the ground terminal to battery sensor. NOTE ...

Other materials:

Removal
CAUTION:Refer to “CAUTION” of “General Description” before handling the airbag system components. General Description > CAUTION1. Turn the ignition switch to OFF.2. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. ...