Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Continuously variable transmission(tr690) / Control valve body / Inspection

• Check each part for damage or dust.

• Check oil strainer for clogging.

• Measure the resistance of each solenoid.

NOTE:

Measurement should be performed at a temperature of 20°C (68°F).

Solenoid	Terminal No.	Standard (-)
Secondary solenoid	No. 1 — control valve body	Approx. 6.6 -
Lock-up duty solenoid	No. 2 — control valve body	Approx. 12 -
F&R solenoid	No. 3 — control valve body	Approx. 5.3 -
Lock-up ON/OFF solenoid	No. 5 — control valve body	Approx. 16 -
Primary DOWN solenoid	No. 6 — control valve body	Approx. 12 -
Primary UP solenoid	No. 7 — control valve body	Approx. 12 -
AWD solenoid	No. 8 — control valve body	Approx. 3.2 -

Removal

CAUTION:• Directly after the vehicle has been running or the engine has been idling for a long time, the CVTF is hot. Be careful not to burn yourself.• Be careful not to spill CVTF on the ...

1. Clean the mating surface of oil pan and transmission case.2. Make sure that the CVTF filter is installed to the transmission case.NOTE:Make sure that the CVTF filter does not protrude from the tran ...

Other materials:

Installation
1. Temporarily install the drive plate and reinforcement drive plate.NOTE:Align the knock pin hole of the crankshaft position sensor plate to the knock pin of the crankshaft to secure the knock pin.2. Set the ST.NOTE:Set the ST to the drive plate referring to the illustration.ST 498497300CRANKSHA ...