• Make sure that all component parts are free of scratches, holes and other faults. • Check the tooth contact. Drive Pinion Shaft Assembly > ADJUSTMENT • Apply CVTF to bearing and rotate the bearing to check for noise or dragging etc. • Check the bearing preload of drive pinion shaft. CAUTION: Before measuring, apply differential gear oil to roller of bearing and rotate the bearing several times. Starting torque: 16.3 — 42.7 N (1.7 — 4.4 kgf, 4.4 — 9.6 lbf) |
Inspection
1. VISUAL INSPECTIONCheck for the following, and replace the damaged parts with new parts.• Combination switch is cracked or deformed.• Roll connector is cracked or deformed.2. UNIT INSPECTION OF ROLL CONNECTORCAUTION:• Do not rotate the roll connector to more than the specified nu ...