Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection
• Check the drive plate for wear and damage. • Check the driven plate for discoloration (burnt color). • Check for worn snap ring, fatigue or damaged return spring or deformed piston retainer. • Replace if its tooth surfaces are broken, damaged or excessively worn. • Check the bearing for seizure or wear. • Apply CVTF to bearing and rotate the bearing to check for noise or dragging etc. |
Installation
NOTE:For installation of front reduction driven gear, refer to the “Front Reduction Drive Gear”. Front Reduction Drive Gear > INSTALLATION ...
Disassembly
1. Remove the front reduction driven shaft from the front reduction driven gear.2. Remove the snap ring.3. Remove the retaining plate, drive plate, driven plate and dish plate.4. Remove the seal ring ...
Other materials:
List
• «Subaru Rear Vehicle Detection(LH)»DisplayContentReference valueNoteSRVD System fail flagCurrent failure status of BSD/RCTA system is displayed.• Normal• Fail — SRVD System HALT flagCurrent temporary stop status of BSD/RCTA system is displayed.Temporary stop: Temporarily stop ...
© 2017-2024 Copyright www.sulegacy.com
