Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Continuously variable transmission(tr690) / Oil pump / Inspection

Check the following items.

• Check the oil pump for damage and wear.

• Rotate the oil pump by hand, and check that it rotates smoothly.

1. Measure the secondary pressure. Secondary Pressure (Line Pressure) Test > INSPECTION

2. Remove the oil pan and oil strainer. Control Valve Body > REMOVAL

3. Check oil strainer for clogging.

When oil strainer has no clogging, replace the oil pump.

Removal

NOTE:Refer to “Drive Pinion Shaft” for removal procedures. Drive Pinion Shaft Assembly > REMOVAL ...

Installation

NOTE:Refer to “Drive Pinion Shaft” for installation procedures. Drive Pinion Shaft Assembly > INSTALLATION ...

Other materials:

Dtc c2124 transmitter 4 no data
DTC DETECTING CONDITION:Detected when no data is received from each transmitter for 8 minutes or more at a vehicle speed of 40 km/h (25 MPH) or more. (Timer is not cleared when the vehicle speed becomes lower than 40 km/h halfway.)TROUBLE SYMPTOM:Tire pressure warning light blinks 25 times and then ...