Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Continuously variable transmission(tr690) / Reduction driven gear / Inspection

• Check the ball bearing for smooth rotation.

• Check the ball bearing for excessive looseness.

• Check the reduction driven gear for breakage or damage.

• Check the clearance between snap ring and transmission case and replace the snap ring as necessary.

Installation

1. Install the straight pin to reduction driven gear assembly.2. Fit the straight pin portion to the recess portion of transmission case and install the reduction driven gear and install the snap ring ...

Disassembly

1. Remove the bearing retainer using ST1, ST2 and ST3.ST1 899864100REMOVERST2 398497701SEATST3 18767AA000BEARING REMOVER2. Remove the snap ring.3. Remove the ball bearing using ST1, ST2 and S ...

Other materials:

Dtc p2763 torque converter clutch pressure control solenoid control circuit high
DTC DETECTING CONDITION:Immediately at fault recognitionTROUBLE SYMPTOM:• No lock-up occurs.• Engine stalls.1. ENGINE TYPE FBWIRING DIAGRAM:CVT control system CVT Control System > WIRING DIAGRAMSTEPCHECKYESNO1.CHECK HARNESS.CAUTION:Start work after ATF cools down.1) Turn the ignition sw ...