• Inspect the drive plate facing for wear and damage. • Check the driven plate for discoloration (burnt color). • Check for worn snap ring, fatigue or damaged return spring or deformed spring retainer. • Make sure the clearance between retaining plate and snap ring of reverse brake is within the limit. If it exceeds the limit, replace with a new drive plate and select and adjust the retaining plate within the initial standard value. Reverse Brake Assembly > ASSEMBLY |
Installation
1. Support the fuel tank with a transmission jack, set the fuel tank and the fuel tank band in place, and temporarily tighten the bolts of the fuel tank band.WARNING:A helper is required to perform this work.2. Correctly insert the fuel filler hose to the spool, and then install the clamp as shown.T ...