Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection
1. Start and warm up the engine. 2. Shift the select lever to “P” or “N” range. 3. Depress the brake pedal and hold it. 4. Check “secondary pressure sensor voltage” by using Subaru Select Monitor while the engine is idling. Subaru Select Monitor > OPERATION Specification: Approx. 0.8 V 5. Check “secondary pressure sensor voltage” by using Subaru Select Monitor while the engine is stopped and the ignition switch is turned on. Subaru Select Monitor > OPERATION Specification: Approx. 0.5 V |
Removal
CAUTION:• Be sure to prevent water or oil from contacting the connector terminal of secondary pressure sensor. If adhesion occurs, replace with a new part.• When removing secondary pressur ...
Installation
CAUTION:• Be sure to prevent water or oil from contacting the connector terminal of secondary pressure sensor. If adhesion occurs, replace with a new part.• After installing the secondary ...
Other materials:
Dtc p0073 ambient air temperature sensor circuit "a" high
NOTE:For the diagnostic procedure, refer to DTC P0072. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC P0072 AMBIENT AIR TEMPERATURE SENSOR CIRCUIT "A" LOW1. OUTLINE OF DIAGNOSISDetect the open or short circuit of ambient temperature sensor.Judge as NG if out of specification.2. COMPO ...
