Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Continuously variable transmission(tr690) / Torque converter assembly / Inspection

• Check the protrusion of torque converter center (front boss) is not deformed or damaged.

• Check the ring gear and exterior for break or damage.

Removal

1. Remove the transmission assembly from the vehicle. Automatic Transmission Assembly > REMOVAL2. Pull out the torque converter assembly horizontally.CAUTION:Do not scratch the inside of engaging par ...

Installation

1. Install the O-ring to front reduction drive gear.NOTE:• Use new O-rings.• Apply CVTF to the O-rings.2. While holding the torque converter assembly by hand, carefully install it into the ...

Other materials:

Removal
CAUTION:When the combination meter is replaced, perform the variant work. Combination Meter System > OPERATION1. Disconnect the ground terminal from battery sensor. NOTE2. Release the lock, tilt the steering column to the lowest end and fully extend the column by the telescopic system.3. Remove th ...