Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Cooling(h4do) / Active grille shutter / Inspection

Check that the active grille shutter does not have deformation, cracks and any other damage.

Removal

1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the front bumper. Front Bumper > REMOVAL3. Disconnect the connector from ambient sensor.4. Disconnect the connector from the acti ...

Installation

1. Install the ambient sensor.2. Install the active grille shutter using the bolts securing the active grille shutter.Tightening torque:7.5 N·m (0.8 kgf-m, 5.5 ft-lb)3. Connect the connector to ...

Other materials:

Basic diagnostic procedure procedure
CAUTION:Remove foreign matter (dust, water, oil etc.) from the VDCCM&H/U connector during removal and installation.NOTE:• To check the harness for open or short circuits, shake problem spot or connector.• Refer to “Check List for Interview”. Check List for InterviewSTEPCHECK ...