Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Cooling(h4do) / Engine coolant / Inspection

NOTE:

When adding the engine coolant, always use SUBARU Super Coolant.

1. Park the vehicle on a level surface.

2. Check the engine coolant amount, and if the coolant level is low, check for the coolant leakage, and then add the engine coolant.

(1) Make sure the engine coolant level in the reservoir tank is between “FULL” and “LOW” with the engine in a cold condition.

(2) Open the radiator cap and make sure that the radiator is filled with the engine coolant up to its filler neck position.

Adjustment

1. PROCEDURE TO ADJUST THE SUBARU SUPER COOLANT CONCENTRATIONCAUTION:Use the SUBARU Super Coolant with a 50 — 60% concentration in order to obtain maximum anti-freeze and anti-rust performance.To ad ...

General description

...

Other materials:

Installation
CAUTION:• Do not start the engine before charging refrigerant.• If the engine is started with no refrigerant charge, replace the compressor assembly.• Replace O-rings and pipe clamps with new parts and install securely.• Before handling the airbag system components, refer to ...