Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Cooling(h4do) / Water pipe assembly / Inspection

1. Check that the water pipe assembly has no deformation, cracks or other damages.

2. Check that the hose has no cracks, damage or loose part.

Removal

1. WATER PIPE ASSEMBLY RH1. Disconnect the ground terminal from battery sensor. NOTE2. Drain engine coolant. Engine Coolant > REPLACEMENT3. Remove the front exhaust pipe. Front Exhaust Pipe > REMOV ...

Installation

1. WATER PIPE ASSEMBLY RH1. Position the water pipe assembly RH, and install the bolt (D) securing the water pipe assembly RH to the cam carrier RH.2. Connect the water pipe hose RH (C) to the oil pan ...

Other materials:

Dtc p0198 engine oil temperature sensor "a" circuit high
DTC DETECTING CONDITION:Immediately at fault recognitionTROUBLE SYMPTOM:• Hard to start• Improper idling• Poor driving performanceCAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mode > PROC ...