Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Cooling(h4do) / Water pump / Inspection

1. Check that the water pump pulley does not have deformation, cracks and any other damage.

2. Check the water pump bearing for smooth rotation.

3. Make sure the impeller is not abnormally deformed or damaged.

Removal

1. WATER PUMP PULLEY1. Remove the V-belts. V-belt > REMOVAL2. Remove the water pump pulley using the ST.ST1 18355AA000PULLEY WRENCHST2 18334AA030PULLEY WRENCH PIN SET2. WATER PUMP1. Remove the ...

Installation

1. WATER PUMP PULLEY1. Using the ST, install the water pump pulley.ST1 18355AA000PULLEY WRENCHST2 18334AA030PULLEY WRENCH PIN SETTightening torque:14 N·m (1.4 kgf-m, 10.3 ft-lb)2. Install ...

Other materials:

Installation
1. Clean the mating surface of oil pump chain cover and converter case.2. Using the ST, install the oil seal.NOTE:• Use a new oil seal.• Apply CVTF to the oil seal lip and press-fitting surface.ST 499755602PRESS SNAP RING3. Install the drive sprocket.4. Install the snap ring so that i ...