1. Check that the radiator does not have deformation, cracks or damage. 2. Check that the hose has no cracks, damage or loose part. 3. Remove the radiator cap, fill the radiator with engine coolant, and then install the radiator cap tester to the filler neck of radiator. 4. Apply a pressure of 157 kPa (1.6 kg/cm2, 23 psi) to the radiator and check the following points: • Leakage from the radiator or its vicinity • Leakage from the hose or its connections CAUTION: • Engine should be turned off. • Clean the check points. • Be careful not to deform the filler neck of radiator when installing and removing the radiator cap tester. • Be careful of engine coolant from spurting out when removing the radiator cap tester. |
Front fog light indicator light (if equipped)
This indicator light illuminates while the
front fog lights are illuminated.
X-mode indicator (if equipped)
This indicator appears while the X-mode is
activated. It will disappear when the Xmode
is deactivated.
Hill descent control indicator (if equipped)
This indicator appears while the hil ...