Honda Civic manuals

Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

1. Lift up the vehicle.

2. Remove the filler plug, and then check the gear oil. Replace the gear oil if it is contaminated, deteriorated or cloudy. Differential Gear Oil > REPLACEMENT

3. Check that the gear oil level is within −5 mm (−0.2 in) from the bottom of the filler plug hole. If the level is low, make sure that there is no oil leakage and refill up to the bottom of filler plug hole.

NOTE:

On VA1-types at factory settings, the oil level may be within −14 mm (−0.6 in) from the bottom of the filler plug. This is at normal level, requiring no oil refill.

T-type

(A)

Filler plug

VA1-type

(A)

Filler plug

VA2-type

(A)

Filler plug

4. Install the filler plug.

NOTE:

For the T-type, degrease the thread portion sufficiently and apply liquid gasket to the filler plug.

Liquid gasket:

THREE BOND 1105 (Part No. 004403010) or equivalent

For VA type, use a new gasket.

Tightening torque:

T-type:

49 N·m (5.0 kgf-m, 36.1 ft-lb)

VA-type:

50 N·m (5.1 kgf-m, 36.9 ft-lb)

Replacement
CAUTION:• Gear oil is extremely hot just after driving. Be wary of receiving burns.• Be careful not to spill the differential gear oil on exhaust pipe. If gear oil is spilled, wipe it off ...

General description
...

Other materials:

Registering a Bluetooth Audio device for the first time
To use the Bluetooth Audio, it is necessary to register an audio device with the system. The device registration procedure is the same for both the hands-free system and Bluetooth audio.  Display the "BT Devices Connection" screen. Refer to "Registering a Bluetooth phone for the ...

© 2017-2024 Copyright www.sulegacy.com