Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Differentials / Rear differential front member / Inspection

1. Check the rear differential front member for damage, bend and corrosion.

If damage, bend or corrosion is excessive, replace the rear differential front member.

2. Check the bushings of rear differential front member for cracking, hardening and damage. If cracking, hardening or damage is excessive, replace rear differential front member.

Removal

1. Disconnect the ground cable from battery.2. Lift up the vehicle.3. Support the rear differential using transmission jack, and then remove the rear differential front member.(A)Rear differential fro ...

Installation

Install the rear differential front member with a new self-locking nut.Tightening torque:T1: 50 N·m (5.1 kgf-m, 36.9 ft-lb)T2: 110 N·m (11.2 kgf-m, 81.1 ft-lb) ...

Other materials:

Removal
1. CENTER GRILLE ASSEMBLY1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the panel - center grille assembly.(1) Release the clips and claws.(2) Detach the connectors, and remove the panel - center grille assembly.(3) Remove the switch - hazard. Hazard Switch > REMOVAL2. SIDE G ...