1. SATELLITE SWITCH ASSEMBLY 1. Measure the resistance between connector terminals. Preparation tool: Circuit tester
2. Apply battery voltage between the connector terminals to check lighting condition of illumination inside the switch.
3. If the result of the measurement is not at the standard, replace the satellite switch assembly. 2. TELEMATICS BUTTON 1. Check the button. (1) Measure the resistance between connector terminals. Preparation tool: Circuit tester • SOS button
• i-button
(2) Apply battery voltage between the connector terminals to check lighting condition of illumination inside the switch.
2. Check the indicator. (1) Check the continuity between the connectors.
3. Replace the overhead console or stereo camera cover assembly if the inspection result is not within the standard value. |
SXM setting
An option menu screen is displayed
when you touch the tab on the
lower
left side of the screen. The "Options"
screen will appear.
Option menu screen
No.
Function
1
Set the lock function of each channel.
Input the password is necessary
for oper ...