Honda Civic manuals

Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Fuel injection (fuel systems)(h4do) / Fuel level sensor / Inspection

1. Check that the fuel level sensor has no damage.

2. Measure the fuel level sensor float position.

NOTE:

When inspecting the fuel level sensor, perform the work with the sensor installed to the fuel pump.

(1)

FULL

(2)

EMPTY

(3)

Fuel tank seating surface

Float position

Standard

FULL to Fuel tank seating surface (A)

133.0±4 mm (5.236±0.157 in)

EMPTY to Fuel tank seating surface (B)

21.6±4 mm (0.850±0.157 in)

3. Check the resistance between fuel level sensor terminals by the connector on top of the fuel pump.

Float position

Terminal No.

Standard

FULL (A)

1 and 4

8.7±1.0 -

EMPTY (B)

139.1±2.0 -

Removal
WARNING:Place “NO OPEN FLAMES” signs near the working area.CAUTION:• Be careful not to spill fuel.• If the fuel gauge indicates that two thirds or more of the fuel is remaining ...

Installation
Install in the reverse order of removal.CAUTION:Be sure to install the fuel level sensor harness to the clip first, then install the fuel pump harness. Otherwise, malfunction may occur.(A)Fuel level s ...

Other materials:

Removal
1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the front bumper. Front Bumper > REMOVAL3. Disconnect the connector from ambient sensor.4. Disconnect the connector from the active grille shutter actuator.5. Remove the bolts securing the active grille shutter to remove the acti ...

© 2017-2024 Copyright www.sulegacy.com