Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection
1. Check that the fuel sub level sensor has no damage. 2. Measure the fuel sub level sensor float position. (1) | FULL | (2) | EMPTY | (3) | Datum points |
Float position | Standard | FULL to Datum point (A) | 6.4±3.5 mm (0.252±0.138 in) | EMPTY to Datum point (B) | 163.3±3.5 mm (6.429±0.138 in) |
3. Measure the resistance between fuel sub level sensor terminals. Float position | Terminal No. | Standard | FULL (A) | 1 and 2 | 8.7±1.0 - | EMPTY (B) | 270.9±4.0 - |
|
WARNING:Place “NO OPEN FLAMES” signs near the working area.CAUTION:• Be careful not to spill fuel.• Catch the fuel from the tubes using a container or cloth.• If the fuel ...
1. Install the fuel sub level sensor to the fuel tank.CAUTION:Set the arm and float of the fuel sub level sensor while paying attention to prevent them from contacting the fuel tank. If the arm of the ...
Other materials:
Memory function
Memory switch
Memory switch status
ON status
OFF status
Your desired rear gate height can be registered.
Registration of the rear gate height:
To register the rear gate height, perform
the following procedures while the ignition
switch is in the "LOCK"/"OFF" position.
...