Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection
1. Check that the knock sensor has no deformation, cracks or other damages. 2. Measure the resistance between knock sensor terminals. Terminal No. | Standard | 1 and 2 | 560±28 k- |
|
1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the bolt securing the connector to the A/C compressor.3. Disconnect the connector (A) from the knock sensor, and remove the knock ...
1. Install the knock sensor to the cylinder block, and connect the connector to the knock sensor.NOTE:• Install the knock sensor connector so that the center of the connector is aligned with the ...
Other materials:
Installation
1. TRANSMITTER (TIRE INFLATION PRESSURE SENSOR)CAUTION:Use the new transmitter assembly or replace the new valve and screw, when installing.1. Replace the valve and screw with a new part when reusing transmitter.(1)Screw(2)Transmitter(3)ValveTightening torque:1.4 N·m (0.1 kgf-m, 1.0 ft-lb)2. ...