Honda Civic manuals

Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

1. Check that the oil control solenoid has no deformation, cracks or other damages.

2. Measure the resistance between the oil control solenoid terminals.

Terminal No.

Standard

1 and 2

7.25±0.4 - (when 20°C (68°F))

Removal
CAUTION:If the engine oil is spilt over exhaust pipe or the under cover, wipe it off with cloth to avoid emission of smoke or causing a fire.1. Disconnect the ground terminal from battery sensor. NOT ...

Installation
1. Install the intake oil control solenoid to the chain cover, and connect the connector to the intake oil control solenoid.NOTE:• Use new O-rings.• Apply engine oil to O-ring.Tightening t ...

Other materials:

Dtc b1574 key communication
1. EXCEPT FOR C0 AND C5 MODELSDIAGNOSIS START CONDITION:• Battery voltage is 10 V or more.• The remote engine starter was not used to start the engine.DTC DETECTING CONDITION:Communication failure between ignition key and body integrated unitTROUBLE SYMPTOM:• Engine will not start. ...

© 2017-2024 Copyright www.sulegacy.com